 |
Bachmann E-Z Command controller.
Can control up to 10 digital locomotives and one analogue locomotive.
DVD instructions and transformer included. |
Not currently available |
 |
Bachmann E-Z Command controller with DCC
equipped diesel locomotive.
Can control up to 10 digital locomotives and one analogue locomotive. DVD instructions and transformer included.
Various roadnames available. |
267.00 |
 |
Bachmann E-Z Command controller with DCC
equipped steam locomotive.
Can control up to 10 digital locomotives and one analogue locomotive
. DVD instructions and transformer included. |
Not currently available |
 |
Bachmann E-Z Command Walk-Around Companion.
Additonal controller works in conjunction with the main E_Z Command
controller for 2-person operation. Can be plugged into E-Z Command
Walk-Around Companion connector panels (see below) for operation at
different points on your layout. |
$160.00 |
 |
Bachmann E-Z Command Walk-Around Companion
Connector Panel.
For plugging in the Walk-Around Companion controller (see above) at
different points around your layout. Cable included. |
$69.95 |
 |
Bachmann E-Z Command 5 amp Booster.
Suitable for all scales and other DCC systems (NMRA/NEM conformant). Amplifies the power
available from your Command Station to operate an increased number of DCC
locomotives.
Selectable 14 or 18 volt operation. With cooling fan, instructional DVD,
Power pack and required cables. |
No longer in stock |
 |
Bachmann E-Z Command 5 amp DCC Automatic
Reverse Loop Module.
Automatically switches track polarity on reverse loops. Adjustable
sensitivity for N, HO and large scale (G). |
No longer in stock |
 |
Bachmann E-Z Command decoder
Basic decoder with speed and direction plus front and rear headlight control
with dimming (high / low beam).
Acceleration and deceleration rates can be programmed - but not on Bachmann
E-Z Command controllers. |
$32.95 |
 |
Bachmann E-Z Command decoder with 8-pin plug Basic
decoder with speed and direction plus front and rear headlight control with
dimming (high / low beam).
Acceleration and deceleration rates can be programmed - but not on Bachmann
E-Z Command controllers. |
$35.00 |
|
Please note - the full range of NCE is available to order
- contact us if you are after items not shown here.
Prices change frequently with currency fluctuations and so those shown here should be considered a
guide only.
Contact us for current prices if this page has not
been updated recently - page last updated
05 August 2010 |
 |
NCE Power Cab start set
Power CAB Advance entry level system - consists of
a single throttle, command station, 1.2 A booster and power supply. Full
programming capabilities.
 |
$238.00 |
 |
NCE D13SR Decoder.
4-function, Silent Running, Torque Compensation, 15 lighting effects (Mars,
strobes, beacons etc) 2 or 4 digit addressing, 1.3amp continuous.
34 x 6.5 x 2.7mm |
$19.00 |
 |
NCE D13SR Decoder - 4 pack
as above. |
$70.00 |
| |
NCE D13SRJ Decoder - 4 pack.
as above, but with 9-pin Quick Plug. |
$70.00 |
 |
NCE D13SR Decoder - 10 pack as
above. |
$183.00 |
| |
NCE D13SRP Decoder with 8-pin
plug specs as above |
- |
 |
NCE D14SR Decoder. 21 x 16mm
6-function decoder designed specifically for many Atlas, Kato diesels and
Bachmann Spectrum steam locos and others.
Other features as above. |
$33.00 |
 |
NCE D18SR Decoder. 8-function
decoder. 1.3amps continuous. 8-pin plug (underneath) for locos where decoder
plugs directly on top. All other features as listed for other decoders |
- |
| |
NCE DA-SR decoder. Suits many
Atlas, Athearn Genesis and Kato locomotives and more, including Powerline T
class. |
$23.00 |
 |
NCE BACH-DSL Decoder.
Replacement decoder for Bachmann DCC equipped diesels. Includes golden white
LEDs as headlight replacements for the yellow ones already in the model. |
19.00 |
| |
NCE NAVO decoder. Plug and
play decoder for N scale Atlas VO-100 switcher |
$28.00 |
| |
NCE N112AO decoder. Plug & play for N
scale Atlas GP40-2, CW40-8, U25B, U23B, B23-7 etc. |
|
| |
NCE N12SR Decoder. 2-function decoder. 8.6 x
18 x 3.2mm
Other features as listed elsewhere. |
- |
 |
NCE N14SR Decoder. Generic 4-function
decoder with Silent Running, 1 amp continuous, 15 lighting effects, 2 or 4
digit addressing and more (click on photo).
29 x 10.2 x 2.9mm |
- |
| |
NCE Z14SR decoder. 8.6 x 14.5
x 3.3mm 4-function |
$47.00 |
 |
Golden white LEDs for loco headlights.
Replace the yellow or blueish-white LEDs in your locos with these. 10 per
pack. |
19.00 |
| |
TCS 1006 M1 Full featured BEMF decoder
14.4 x 9.12 x 3.43mm |
$52.75 |
| |
TCS 1021 T1 Full featured BEMF decoder
24.28 x 16.63 x 5.25mm |
$37.00 |
| |
TCS VR1.5 8 - 20 volt input, 1.5
volt output. For using 1.5 volt bulbs fitted to some locos on 12 volt output
of most decoders. |
$18.50 |
| |
NCE SNAP-IT Accessory decoder
for twin-coil switch machines / point motors.
Atlas, Peco etc. |
$21.00 |
| |
NCE UPT Cab bus facia panel. |
$22.00 |
